\n\t\t\t\t\t

\n\t\t\n\t\t\t\t

\n\t\t\t\t

\n\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\t+91 93197 23685<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t
\n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\tinfo@wahren.in<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\n\t\t\t\t\t\t\tPlot No. 57, Sector-155, Noida, Uttar Pradesh \u2013 201301<\/span>\n\t\t\t\t\t\t\t\t\t<\/li>\n\t\t\t\t\t\t<\/ul>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t

\n\t\t\n\t\t\t\t

\n\t\t\t\t

\n\t\t\t\t\t\t\t\t\t\t\t\t\t\t\t $\"\"$ \t\t\t\t\t\t\t\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t

\n\t\t\t\t

\n\t\t\t\t\t

Wahren\nQuad Foil<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
The Cold Forming Blister Foil,
a four-ply laminated foil consisting of Nylon (Oriented Polyamide), Aluminum Foil, Extrusion PE & Ldpe film
having barrier properties against water vapor, gases, light, low VOC and Halogen Free etc. with high
malleability for deep draw for Blister Cavity and higher yield. All raw material used in manufacturing Cold
Forming Blister Foil laminate produce by WAHREN are food grade.
The product is registered with USFDA active DMF having registration no.,<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Applications<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
Quad Foil is primarily used in pharmaceutical flexible packaging<\/strong> where high barrier protection and strong laminate performance are required.<\/p>
Typical applications include:<\/p>
Pharmaceutical sachet and strip packaging<\/p><\/li>
Packaging of powders and granules<\/p><\/li>
Medical and healthcare product packaging<\/p><\/li>
Nutraceutical packaging<\/p><\/li>
Moisture-sensitive pharmaceutical formulations<\/p><\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Specification<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
12 Mic CC Pet\/17 Gsm White PE\/09 Mic soft foil \/ 35 Gsm PE<\/li>
23 Mic CT Pet \/ 16 Gsm White PE\/ 20 Mic soft foil \/ 35 Gsm PE<\/li>
12 Mic CC Pet\/17 Gsm PE \/ 12 Mic soft foil \/ 20 Gsm PE \/ 30 Mic LDPE Film<\/li>
23 Mic Pet \/ 20 Mic Alu Foil \/ 36 Mic Extruded PE<\/li>
18 BOPP \/ 12 Mic MET PET \/ 90 LDPE NAT<\/li><\/ul>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t
Technical Specification<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
Test Parameters<\/strong><\/th> Units<\/strong><\/th> Standard Specification<\/strong><\/th><\/tr><\/thead>
Product Name<\/strong><\/td> \u2014<\/td> Wahren Emerald Quad Alu-Alu Foil BOPA 25\u00b5 \/ Al. Foil 50\u00b5 \/ 12 Extrusion PE \/ LDPE 50\u00b5<\/td><\/tr>
Width<\/td> MM<\/td> \u00b1 1 mm<\/td><\/tr>
OPA Layer GSM<\/td> gm\/m\u00b2<\/td> 26.5 \u2013 31.1<\/td><\/tr>
OPA Layer Thickness<\/td> Micron<\/td> 23.0 \u2013 27.0<\/td><\/tr>
Adhesive GSM<\/td> gm\/m\u00b2<\/td> 4.8 \u2013 5.2<\/td><\/tr>
Aluminum Foil GSM<\/td> gm\/m\u00b2<\/td> 129.6 \u2013 143.1<\/td><\/tr>
Aluminum Foil Thickness<\/td> Micron<\/td> 48.0 \u2013 53.0<\/td><\/tr>
Extrusion Primer<\/td> gm\/m\u00b2<\/td> 0.1 \u2013 0.2<\/td><\/tr>
Extrusion Film GSM<\/td> gm\/m\u00b2<\/td> 10.92 \u2013 12.74<\/td><\/tr>
Extrusion Layer Thickness<\/td> Micron<\/td> 12 \u2013 14<\/td><\/tr>
LDPE Film GSM<\/td> gm\/m\u00b2<\/td> 45.5 \u2013 50.05<\/td><\/tr>
LDPE Layer Thickness<\/td> Micron<\/td> 50 \u2013 55<\/td><\/tr>
Total GSM<\/strong><\/td> gm\/m\u00b2<\/td> 217.32 \u2013 237.19<\/td><\/tr>
Total Thickness<\/strong><\/td> Micron<\/td> 187.0 \u2013 213.4<\/td><\/tr>
OTR<\/td> cc\/m\u00b2\/day<\/td> \u2264 0.005<\/td><\/tr>
WVTR \/ MVTR<\/td> gm\/m\u00b2\/day<\/td> \u2264 0.005<\/td><\/tr>
Residual Solvent (GC)<\/td> mg\/m\u00b2<\/td> 0.1<\/td><\/tr>
Pin Hole<\/td> No.\/SQM<\/td> NIL<\/td><\/tr>
Toxicity<\/td> \u2014<\/td> Non-Toxic<\/td><\/tr>
Bonding Strength (OPA \/ Alu Foil)<\/td> N\/15MM<\/td> \u2265 4.00<\/td><\/tr>
Bonding Strength (Alu Foil \/ Ext PE)<\/td> N\/15MM<\/td> \u2265 4.00<\/td><\/tr>
Bonding Strength (Ext PE \/ LDPE)<\/td> N\/15MM<\/td> \u2265 4.00<\/td><\/tr>
No. of Joints<\/td> No.<\/td> Max 2 per roll<\/td><\/tr>
Core ID<\/td> MM<\/td> 76 \u00b1 1 mm<\/td><\/tr>
Packing<\/td> \u2014<\/td> Roll wrapped in stretch film with core insert, core plug & bubble film with edge guard; packed in corrugated boxes with BOPP tape\/Nylon strap with label<\/td><\/tr>
Storage Condition<\/td> \u2014<\/td> Temp. 15\u201335\u00b0C, dry atmosphere, protected from moisture & dust; RH 30\u201350%<\/td><\/tr>
Re-Test Period<\/td> \u2014<\/td> 18 months from date of manufacturing<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t
\n\t\t\n\t\t
\n\t\t\t\t\t
\n\t\t\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\n\t\t
\n\t\t\t
\n\t\t\t\t
Get in touch<\/h2>\n\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t
To subscribe to Wahren updates,
please enter your email address in the field below.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Test Parameters<\/strong><\/th>	Units<\/strong><\/th>	Standard Specification<\/strong><\/th><\/tr><\/thead>
Product Name<\/strong><\/td>	\u2014<\/td>	Wahren Emerald Quad Alu-Alu Foil BOPA 25\u00b5 \/ Al. Foil 50\u00b5 \/ 12 Extrusion PE \/ LDPE 50\u00b5<\/td><\/tr>
Width<\/td>	MM<\/td>	\u00b1 1 mm<\/td><\/tr>
OPA Layer GSM<\/td>	gm\/m\u00b2<\/td>	26.5 \u2013 31.1<\/td><\/tr>
OPA Layer Thickness<\/td>	Micron<\/td>	23.0 \u2013 27.0<\/td><\/tr>
Adhesive GSM<\/td>	gm\/m\u00b2<\/td>	4.8 \u2013 5.2<\/td><\/tr>
Aluminum Foil GSM<\/td>	gm\/m\u00b2<\/td>	129.6 \u2013 143.1<\/td><\/tr>
Aluminum Foil Thickness<\/td>	Micron<\/td>	48.0 \u2013 53.0<\/td><\/tr>
Extrusion Primer<\/td>	gm\/m\u00b2<\/td>	0.1 \u2013 0.2<\/td><\/tr>
Extrusion Film GSM<\/td>	gm\/m\u00b2<\/td>	10.92 \u2013 12.74<\/td><\/tr>
Extrusion Layer Thickness<\/td>	Micron<\/td>	12 \u2013 14<\/td><\/tr>
LDPE Film GSM<\/td>	gm\/m\u00b2<\/td>	45.5 \u2013 50.05<\/td><\/tr>
LDPE Layer Thickness<\/td>	Micron<\/td>	50 \u2013 55<\/td><\/tr>
Total GSM<\/strong><\/td>	gm\/m\u00b2<\/td>	217.32 \u2013 237.19<\/td><\/tr>
Total Thickness<\/strong><\/td>	Micron<\/td>	187.0 \u2013 213.4<\/td><\/tr>
OTR<\/td>	cc\/m\u00b2\/day<\/td>	\u2264 0.005<\/td><\/tr>
WVTR \/ MVTR<\/td>	gm\/m\u00b2\/day<\/td>	\u2264 0.005<\/td><\/tr>
Residual Solvent (GC)<\/td>	mg\/m\u00b2<\/td>	0.1<\/td><\/tr>
Pin Hole<\/td>	No.\/SQM<\/td>	NIL<\/td><\/tr>
Toxicity<\/td>	\u2014<\/td>	Non-Toxic<\/td><\/tr>
Bonding Strength (OPA \/ Alu Foil)<\/td>	N\/15MM<\/td>	\u2265 4.00<\/td><\/tr>
Bonding Strength (Alu Foil \/ Ext PE)<\/td>	N\/15MM<\/td>	\u2265 4.00<\/td><\/tr>
Bonding Strength (Ext PE \/ LDPE)<\/td>	N\/15MM<\/td>	\u2265 4.00<\/td><\/tr>
No. of Joints<\/td>	No.<\/td>	Max 2 per roll<\/td><\/tr>
Core ID<\/td>	MM<\/td>	76 \u00b1 1 mm<\/td><\/tr>
Packing<\/td>	\u2014<\/td>	Roll wrapped in stretch film with core insert, core plug & bubble film with edge guard; packed in corrugated boxes with BOPP tape\/Nylon strap with label<\/td><\/tr>
Storage Condition<\/td>	\u2014<\/td>	Temp. 15\u201335\u00b0C, dry atmosphere, protected from moisture & dust; RH 30\u201350%<\/td><\/tr>
Re-Test Period<\/td>	\u2014<\/td>	18 months from date of manufacturing<\/td><\/tr><\/tbody><\/table>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t \n\t\t\n\t\t \n\t\t\t\t\t \n\t\t\n\t\t\t\t \n\t\t\t\t \n\t\t\t\t\t\n\t\t \n\t\t\t \n\t\t\t\t Get in touch<\/h2>\n\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t \n\t\t\t\t \n\t\t\t\t\t\t\t\t\t To subscribe to Wahren updates, please enter your email address in the field below.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\n\t\t\t\t \n\t\t\t\t \n\t\t\t\t\t