Ultra/High - Barrier Films
- PVDC
- Triplex
- Duplex
- Aclar
- Ultra - Safe PVDC
Blister Foils / Lidding Foils
- Printed Blister Foils
- Unprinted Blister Foils
- Push-Through Foils (PTP)
- Heat Seal Coated Foils
- Child-Resistant Lidding Foils
Cold Form Blister Foils
- Printed Cold Form Blister Folis
- Plain Cold Form Blister Foils
- Quad Foil
- Tropical Foil
- Dessicant Foil
Extrusion Laminates
- Sachet
- Multi - Layer Laminates
- +91 93197 23685
- info@wahren.in
- Plot No. 57, Sector-155, Noida, Uttar Pradesh – 201301
Wahren Unprinted Blister Foils
Unprinted Blister Foils are manufactured by Wahren. These foils are produced using high-quality pharmaceutical-grade aluminium foil coated with heat-seal lacquer, designed specifically for blister packaging applications.
The foil provides an excellent barrier against moisture, oxygen, light, and contamination, ensuring maximum protection for pharmaceutical products. The unprinted surface allows flexibility for plain packaging or secondary printing/labeling, while maintaining consistent sealing performance with PVC, PVDC, Triplex, and other blister films.
Applications
Unprinted Blister Foils are widely used in pharmaceutical blister packaging to seal formed blister cavities containing tablets, capsules, and other solid dosage forms.
Specification
- 12 Mic CC Pet/17 Gsm White PE/09 Mic soft foil / 35 Gsm PE
- 23 Mic CT Pet / 16 Gsm White PE/ 20 Mic soft foil / 35 Gsm PE
- 12 Mic CC Pet/17 Gsm PE / 12 Mic soft foil / 20 Gsm PE / 30 Mic LDPE Film
- 23 Mic Pet / 20 Mic Alu Foil / 36 Mic Extruded PE
- 18 BOPP / 12 Mic MET PET / 90 LDPE NAT
Technical Specification
| Sr. No. | Test Parameters | Unit | Standard Specification |
|---|---|---|---|
| 1 | Aluminium Foil Thickness | Micron | 20 ± 10% |
| 2 | Aluminium Foil GSM | g/m² | 54 – 60 |
| 3 | Heat Seal Coating | g/m² | 5 – 8 |
| 4 | Surface Finish | — | Plain / Unprinted |
| 5 | Seal Strength with PVC / PVDC | N / 15 mm | ≥ 6 |
| 6 | Pin Holes | No./m² | NIL |
| 7 | Barrier Properties | — | Excellent Moisture & Oxygen Barrier |
| 8 | Residual Solvent | mg/m² | As per pharmaceutical standards |
| 9 | Reel Width | mm | As per customer requirement |
| 10 | Core ID | mm | 76 ± 1 mm |
| 11 | Packaging | — | Rolls packed with protective wrapping and edge guards |
Get in touch
To subscribe to Wahren updates,
please enter your email address in the field below.